MIT scheme: who it is for, what is open, and when it does not fit

Order emails retyped every morning, a forecast that misses, a planning that lives in one person's head: anyone looking for a scheme for that soon ends up at the MIT. The honest answer is that the MIT is meant for SMEs in the top sectors and regions, and a wholesaler often does not qualify. Then the WBSO is the route, or a small first step without subsidy. Where it does fit there are two maximums: up to €20,000 for a feasibility study, and up to €350,000 per project for R&D collaboration between two or more SMEs. Both 2026 windows have passed, and no new dates are known.Updated: November 2026

Max. feasibility
€20.000
Max. R&D collaboration, per project
€350.000
Both instruments
35%
2026 windows passed, no new date
Closed
  • Wholesaler: nobody retypes two of three order emails any more (3,300 of 5,017, measured September 2026)
  • Masparts predicts quotes with 84% accuracy
  • Forecast for new products: from 40% to 86% accuracy, at a market leader in construction tools, measured on its own history
1Quick answer
  1. Orders retyped every morning, a forecast that misses, a planning in someone's head: that is the problem behind most searches for the MIT scheme. The next question is whether the MIT fits, and for a wholesaler it often does not.

  2. The MIT is for SMEs in the top sectors and regions. Feasibility: up to €20,000 (35%), run per province, no longer by RVO. R&D collaboration: up to €350,000 per project (35%), at least two SMEs.

  3. Status on 2 November 2026: the R&D collaboration window (9 June to 15 September) has passed, and so has the AI window (7 April to 26 May; 77 proposals, 18 granted). Temporarily closed, no new date announced.

  4. When the MIT does not fit, the WBSO is the usable route for technical development work. Setting up existing software does not qualify under either scheme.

  5. First step: a 30-minute intro call. If nothing fits, we say so, and no proposal follows.

2Status & timing

When can you apply?

For most schemes the opening date is what counts, the budget is often gone on day one. Here's the live status.

MIT-haalbaarheid

Closed, next round
Next opening
April 7, 2027 (estimated)
Allocation
lottery on opening day
Start prep
~5 weeks ahead
Rate
35%
Max
€20.000

The budget is usually gone on opening day. Order is decided by lottery, so submitting earlier doesn't help, make sure your complete application is ready on day one.

MIT R&D-samenwerking

Closed, next round
Next opening
June 9, 2027 (estimated)
Allocation
tender, assessed on quality
Start prep
~14 weeks ahead
Rate
35%
Max
€350.000 (groot) / €200.000 (klein)
Budget
€3 miljoen

The deadline is firm, but quality beats speed. Start a strong dossier well ahead, submitting early gives no advantage.

Don't miss the opening day

Leave your region and email. We'll reach out personally, well before MIT-haalbaarheid opens, to check whether you qualify and prepare your application so it's ready on day one.

For: MIT-haalbaarheid

We don't blast newsletters, we contact you personally, well before the opening date, to prepare your application.

We design the project and help write the application

Stratalytic is a team of solution architects, data scientists and engineers. We design and build the project and help write the application, so it describes work that actually happens. The first step is an intro call of 30 minutes, no obligation.

3Per region

The MIT per region

MIT feasibility is run per region, each with its own opening date and budget. Pick a province to see the 2026 situation. The next round is not yet known.

Dates differ per region. RVO no longer runs MIT feasibility; each province does. The dates below come from regional sources and RVO does not confirm them. Check the regional source before applying.

4The scheme5 topics
01

What the MIT scheme is, and who it is for

The MIT scheme (MKB Innovatiestimulering Regio en Topsectoren) supports technical innovation in SMEs in the top sectors and regions. There are two instruments with two different maximums. MIT feasibility pays up to €20,000 (35%) for one company to find out whether an idea is technically possible. MIT R&D collaboration pays up to €350,000 per project (35%, and €200,000 for a small project) for two or more SMEs developing something new together.

Be honest about the fit: for a wholesaler, a distributor or a production company that wants to improve orders, stock or planning with software, the MIT is often not available. Setting up existing software is not research and development. In that case the WBSO is the usable route, or a small first step without subsidy.

02

Where things stand on 2 November 2026

R&D collaboration: the 2026 window ran from 9 June to 15 September and has passed (national budget €3 million, 35%). RVO now lists the scheme as temporarily closed and has announced no new date. In earlier years the window fell in the same months, but 2027 is not confirmed.

R&D collaboration AI: the window ran from 7 April to 26 May 2026. 77 proposals were ranked and 18 received a grant. Also temporarily closed, with no new date. The route needs two or more SMEs; see AI and data subsidy.

Feasibility: RVO no longer runs these projects. They run per province. According to regional sources the 2026 window ran from 7 April to 15 September (up to €20,000, 35%), with the budget often gone at opening. RVO does not confirm these dates, and the next round is not yet known.

03

When the MIT fits, and when it does not

It fits when the work is technically new, the outcome is uncertain, and the company is an SME in a top sector or region. For R&D collaboration there must also be a second SME that takes part in the project. A feasibility study is the smaller step: one company, one question, an answer before building.

It does not fit when the project connects or configures software the way it was meant to be used. Two systems that do not talk to each other can still be a technical problem; whether it counts depends on whether the solution exists yet. We assess that in the first conversation and say so if the answer is no.

04

An example of a feasibility project

An illustration, not a client case. A production company wants to know whether machine failures can be predicted from the data the machines already produce, before investing in a full build. A feasibility study answers that question on a small scale: is the data good enough, how far ahead can a failure be seen, and what would building it cost. If the answer is no, the company has not built anything.

The same logic applies to a forecast: for a wholesaler, a trial on two years of order history shows whether it beats the forecast that runs now, before anyone builds. At a market leader in construction tools, accuracy for new products rose from 40% to 86%, measured on its own history.

05

Applying: be ready on opening day

For feasibility, the budget per province is allocated first-come, first-served, with a lottery if oversubscribed, and according to regional sources it is often gone at opening. A complete application ready beforehand matters more than a deadline. R&D collaboration is a tender: proposals are ranked on quality, so a clearly defined technical innovation, goals with a number, a realistic plan and a budget that matches the work plan decide the outcome.

We follow the dates, but we cannot give a next date: it is not announced. Sign up for the subsidy alert below, and we send a message as soon as a window is announced.

5Process

How does it work?

  1. A 30-minute intro call

    We go through the work problem and the project idea, and say whether the MIT, the WBSO or neither fits. If nothing fits, no proposal follows.

  2. A small trial on your own data

    Two years of history from the ERP and the Excel files next to it, and a trial that shows what there is to gain before anything is built.

  3. Application and build

    If a scheme fits and a window is open, we write the application. We build next to the existing systems, and the team keeps control.

6FAQ

Frequently asked questions

When does the MIT scheme open again?

That is not known yet. In 2026 the R&D collaboration scheme had a window from 9 June to 15 September, and R&D collaboration AI from 7 April to 26 May. Both have passed and RVO lists the scheme as temporarily closed, with no new date. In earlier years the windows fell in the same months, but a 2027 date has not been confirmed. RVO no longer runs the feasibility projects; those run per province and the next round is not yet known. Current dates are on the RVO site and with the province.

Do I need a partner for MIT R&D?

Yes. MIT R&D collaboration requires at least two SME partners carrying out a project together. It is about joint development, not outsourcing. A company can apply for MIT feasibility alone. Without a suitable partner the collaboration route is usually not an option, and we look at the WBSO instead.

Does a wholesaler or production company qualify for MIT?

Often not. The MIT is aimed at SMEs in the top sectors and regions, and requires technically innovative work. A wholesaler that sets up existing software, or connects a standard package the way it was meant to be connected, does no research and development and does not qualify. A connection or forecast that does not exist technically yet may qualify for the WBSO. We first assess whether the work fits, and say so if it does not.

Can I combine MIT with the WBSO?

Often, yes. The MIT covers project costs (35%); the WBSO reduces payroll tax on hours spent on technical development work (36% on the first €391,020 of the base in 2026, 16% above that, 50% for starters on the first tier). State aid rules apply to the same costs, so we check per project what can be combined.

What is the chance of getting approved?

It depends on the instrument. For MIT feasibility the budget per province is allocated first-come, first-served, with a lottery if oversubscribed; according to regional sources the budget is often gone at opening. MIT R&D collaboration is a tender: proposals are ranked on quality. For the AI variant in 2026, 77 proposals were ranked and 18 received a grant.

Which projects are eligible for MIT?

Projects that are technically innovative for SMEs: the result does not exist yet and the outcome is uncertain. An example is predicting machine failures from the data that already exists. The project must go beyond what is common in the sector. Commercial or organisational projects fall outside the scope: the core must be technical innovation.

What is the difference between MIT feasibility and MIT R&D?

MIT feasibility (up to €20,000, 35%) is for one company that wants to find out whether an idea is technically possible before investing in building it. MIT R&D collaboration (up to €350,000 per project, 35%) is for two or more SMEs developing something new together. Feasibility runs per province, R&D collaboration nationally via RVO.

Thirty minutes to see where the biggest impact is.

An honest estimate in numbers, even if the answer is that it does not pay off.